So another week has past, I got some small things done but at this stage it's pretty much all small things until I attack the wiring.
 |
| I'm pointing to a section of the frame that hits the CV joint boot clip I'm grinding down. |
 |
| Axle reinstalled and now it clears. |
 |
| Another small clearance issue to deal with, the O2 sensor is clocked too high on the header so it hits the oil pan flange. I ground away some of the flange (welded washers together) and made a spacer to move the exhaust down a bit. |
 |
| Here is a shot of several different tubes all secured yet insulated from each other with zip ties. O2 sensor on the left. |
 |
| In this shot you can see how this engine "fits" in the car. Technically it doesn't so you have to cut some areas like this notch for a sensor. |
 |
| Here is Fynn, he is 2 years old and is the sole operator of his own shop. |
 |
| Very quick turn around! |
 |
| Even Mia is into cars, she loved this Band-Aid I drew for her. |
No comments:
Post a Comment
Fell free to post any questions and I'll do my best to help you out with your project.